Econobelt Handbook of Timing Belts and Tensioners - Q450 TCR Type Tensioner

Catalog Number	Load (N)		Chain Pitch	Teeth	A	B	C	CH	D	E	F	G	H	I	L	M	N	ß
	Min	Max
QCT-TCR003S*	80	160	3/8" x 7/32"	21	5	15	15	24	63	35	23	23	75.5	9.2	119	M10	19.7	45°
QCT-TCR003D*
QCT-TCR103S	120	240	3/8" x 7/32"	21	5	15.5	15.5	24	69	36	30	25	86.5	9.2	134	M10	19.7	45°
QCT-TCR103D														11			18
QCT-TCR104S	120	240	1/2" x 5/16"	16	5	15.5	15.5	24	69	36	30	25	86.5	9.2	134	M10	19.7	45°
QCT-TCR104D														12.5			16.5
QCT-TCR105S	120	240	5/8" x 3/8"	17	5	15.5	15.5	24	69	36	30	25	86.5	9.2	134	M10	19.7	45°
QCT-TCR105D														15.3			21.8
QCT-TCR205S	240	380	5/8" x 3/8"	17	7	18	18	27	90	43	34	30	100	9.2	159	M12	19.7	30°
QCT-TCR205D														15.3			21.8
QCT-TCR206S	240	380	3/4" x 7/16"	15	7	18	18	27	90	43	34	30	100	9.2	159	M12	19.7	30°
QCT-TCR206D														17.7			19.4
QCT-TCR208S	240	380	1" x 17 mm.	12	7	18	18	27	90	43	34	30	100	8.9	159	M12	19.4	30°
QCT-TCR208D														26.4			23.9

*Acetal arm.
NOTES: Orientation of roller is supplied as shown. End user can reposition if necessary.
All dimensions are in mm unless otherwise noted.